Getting To The Point – Windows
Understanding Window Wells and Covers An egress window is a window located in the basement of a building to aid in emergency entrance or exists. Because the windows are meant for emergencies, it is required that they follow an agreed construction standard. One of the requirements for egress windows is that they should be large enough to allow for people to exit or enter through them without any strain during an emergency. Normally, the universally accepted standard measurements for it are 44 inches from the floor of the basement. Additionally, the windows ought to be of a surface area of not less than 5.7 inches and their height should be 2 feet high. As seen from the foregoing, the window location is in the basement of a building. In addition, it should have a window well around it. A window well is a dug out well outside an egress window. The materials used for reinforcing the window well include metals, bricks, plastic or fortified timber. The purpose for window well is to permit for emergency exit. Several reasons necessitate the need for covering window wells. First, the covering of the window well will prevent runoff water from collecting in the well and subsequently into the building. Also, for building whose construction is still ongoing, covering the window well will ensure that debris doesn’t collect it. The window well covers also keep off falling snow from the window well. The singlemost important purpose for the window well covers, however, is to trap falling people. Due to the fact that the wells are beneath the ground level, covering them obviates the risk of people falling into them. Due to this most important purpose, therefore, the covers should be made of materials that are sturdy enough.
What I Can Teach You About Kits
There are rules and regulations in place that are meant to guide on the general requirements for the window well covers. First of all, the covers ought to be easy to remove should an emergency occur. This is to imply that no special equipment should be necessary for the lifting of the window well covers. The window well covers also ought to be strong enough so that they can hold the weight of a falling person. Additionally, the window well covers can be made of transparent material so that trapped people can easily escape by following the light passing through into the window well.
Practical and Helpful Tips: Covers
There are several materials that can be used in the construction of a window well covers. However, the material you choose for your window well cover will be informed on a number of personal preferences.